The ISL22313 integrates a single digitally controlled potentiometer (DCP), control logic and non-volatile memory on a monolithic CMOS integrated circuit.
The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR control the position of the wiper. At power up the device recalls the contents of the DCP's IVR to the WR.
The ISL22313 also has 14 general purpose non-volatile registers that can be used as storage of lookup table for multiple wiper position or any other valuable information. The ISL22313 features a dual supply, that is beneficial for applications requiring a bipolar range for DCP terminals between V- and VCC.
The DCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.
| 芯片型号 | 产品状态 | 温度范围 | 封装尺寸图 | 潮湿敏感度等级MSL | 美元价格US $ |
| ISL22313TFU10Z | 量产 | Full-Range Ind | 10 Ld MSOP | 1 | 1.51 |
| ISL22313TFU10Z-TK | 量产 | Full-Range Ind | 10 Ld MSOP T+R | 1 | 1.51 |
| ISL22313UFU10Z | 量产 | Full-Range Ind | 10 Ld MSOP | 1 | 1.51 |
| ISL22313UFU10Z-TK | 量产 | Full-Range Ind | 10 Ld MSOP T+R | 1 | 1.51 |
| ISL22313WFU10Z | 量产 | Full-Range Ind | 10 Ld MSOP | 1 | 1.51 |
| ISL22313WFU10Z-TK | 量产 | Full-Range Ind | 10 Ld MSOP T+R | 1 | 1.51 |