HIP6004E Buck and Synchronous-Rectifier (PWM) Controller and Output Voltage Monitor

VIN (min) (V)	5
VIN (max) (V)	12
VOUT (min) (V)	1.01
VOUT (max) (V)	1.825
IOUT (max) (A)	20
VBIAS (V)	12

The HIP6004E provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous-rectified buck topology. The HIP6004E integrates all of the control, output adjustment, monitoring and protection functions into a single package.

The output voltage of the converter is easily adjusted and precisely regulated. The HIP6004E includes a 5-input digital-to-analog converter (DAC) that adjusts the output voltage from 1.05VDC to 1.825VDC in 25mV increments steps. The precision reference and voltage-mode regulator hold the selected output voltage to within ±1% over temperature and line voltage variations.

The HIP6004E provides simple, single feedback loop, voltage-mode control with fast transient response. It includes a 200kHz free-running triangle-wave oscillator that is adjustable from below 50kHz to over 1MHz. The error amplifier features a 15MHz gain-bandwidth product and 6V/us slew rate which enables high converter bandwidth for fast transient performance. The resulting PWM duty ratio ranges from 0% to 100%.

The HIP6004E monitors the output voltage with a window comparator that tracks the DAC output and issues a Power Good signal when the output is within ±10%. The HIP6004E protects against over-current and overvoltage conditions by inhibiting PWM operation. Additional built-in overvoltage protection triggers an external SCR to crowbar the input supply. The HIP6004E monitors the current by using the rDS(ON) of the upper MOSFET which eliminates the need for a current sensing resistor.

HIP6004E 特点

Drives two N-Channel MOSFETs
Operates from +5V or +12V Input
Simple single-loop control design
- Voltage-mode PWM control
Fast transient response
- High-bandwidth error amplifier
- Full 0% to 100% Duty Ratio
Excellent output voltage regulation
- ±1% Over Line Voltage and Temperature
5-Bit digital-to-analog output Voltage Selection
- 25mV binary steps 1.05VDC to 1.825VDC
Power good output voltage monitor
Overvoltage and overcurrent fault monitors
- Does not require extra current sensing element, Uses MOSFET's rDS(ON)
Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from 50kHz to over 1MHz
Pb-free available

HIP6004E 应用

VRM8.5 modules for Pentium III and Other Microprocessors
High-Power DC-DC Regulators
Low-Voltage Distributed Power Supplies

HIP6004E 芯片订购指南

芯片型号	产品状态	温度范围	封装尺寸图	潮湿敏感度等级MSL	美元价格US $
HIP6004ECBZ	量产	民用级	20 Ld SOIC	3
HIP6004ECBZ-T	量产	民用级	20 Ld SOIC T+R	3
HIP6004ECVZ	量产	民用级	20 Ld TSSOP	3
HIP6004ECVZ-T	量产	民用级	20 Ld TSSOP T+R	3
HIP6004EV1	Coming Soon			N/A
HIP6004EV1L	停产				N/A
HIP6004ECB	To Be Discontinued	民用级	20 Ld SOIC	1
HIP6004ECB-T	停产	民用级	20 Ld SOIC T+R	1	N/A
HIP6004ECV	停产	民用级	20 Ld TSSOP	1	N/A
HIP6004ECV-T	停产	民用级	20 Ld TSSOP T+R	1	N/A