The HIP4080A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080A includes an input comparator, used to facilitate the "hysteresis" and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080A is well suited for driving Voice Coil Motors, switching power amplifiers and power supplies.
HIP4080A can also drive medium voltage brush motors, and two HIP4080As can be used to drive high performance stepper motors, since the short minimum "on-time" can provide fine micro-stepping capability.
Short propagation delays of approximately 55ns maximize control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in precise control of the driven load.
The similar HIP4081A IC allows independent control of all 4 FETs in a Full Bridge configuration.
| 芯片型号 | 产品状态 | 温度范围 | 封装尺寸图 | 潮湿敏感度等级MSL | 美元价格US $ |
| HIP4080AEVALZ | 量产 | 评估板 | N/A | 价格录入中 | |
| HIP4080AIB | 量产 | 工业级 | 20 Ld SOIC | 1 | 3.52 |
| HIP4080AIBT | 量产 | 工业级 | 20 Ld SOIC T+R | 1 | 3.58 |
| HIP4080AIBZ | 量产 | 工业级 | 20 Ld SOIC | 2 | 2.93 |
| HIP4080AIBZT | 量产 | 工业级 | 20 Ld SOIC T+R | 2 | 2.98 |
| HIP4080AIP | 量产 | 工业级 | 20 Ld PDIP | N/A | 3.54 |
| HIP4080AIPZ | 量产 | 工业级 | 20 Ld PDIP | N/A | 2.96 |
| HIP4080AEVAL | 停产 | 评估板 | N/A | N/A |