The EL6203 is a push-pull oscillator used to reduce laser noise. It uses the standard interface to existing ROM controllers. The frequency and amplitude are each set with a separate resistor connected to ground. The tiny package and harmonic reduction allow the part to be placed close to a laser with low RF emissions. An auto turn-off feature allows it to easily be used on combo CD-RW plus DVD-ROM pick-ups.
One external resistor sets the oscillator frequency. Another external resistor sets the oscillator amplitude. If the APC current is reduced such that the average laser voltage drops to less than 1.1V, the output and oscillator are disabled, reducing power consumption to a minimum.
The current drawn by the oscillator consists of a small bias current, plus the peak output amplitude in the positive cycle. In the negative cycle, the oscillator subtracts peak output amplitude from the laser APC current.
This part is pin-compatible to the EL6201. It is superior to the EL6201 in several ways: It has up to 100mA output capability, it is more power-efficient, it has less harmonic content, and it has an auto shut-off feature activated at 1.1V.
The part is available in the space-saving 5 Ld SOT-23 package. It is specified for operation from 0°C to +70°C.
| 芯片型号 | 产品状态 | 温度范围 | 封装尺寸图 | 潮湿敏感度等级MSL | 美元价格US $ |
| EL6203CWZ-T7 | 量产 | 民用级 | 5 Ld SOT-23 T+R | 2 | 价格录入中 |
| EL6203CWZ-T7A | 量产 | 民用级 | 5 Ld SOT-23 T+R | 2 | 价格录入中 |
| EL6203CW | 停产 | 民用级 | 5 Ld SOT-23 | 1 | N/A |
| EL6203CW-T13 | 停产 | 民用级 | 5 Ld SOT-23 T+R | 1 | N/A |
| EL6203CW-T7 | 停产 | 民用级 | 5 Ld SOT-23 T+R | 1 | N/A |
| EL6203CW-T7A | 停产 | 民用级 | 5 Ld SOT-23 T+R | 1 | N/A |