EL6140

The EL6140 is a combination read + 2 write level laser driver and IV amplifier, with an extra read + oscillator ROM channel for use in dual-laser 'combo' applications. A separate (amplitude and frequency) oscillator modulates the selected output for laser noise reduction during read or write.

The CD pin, when high, selects the CD (write) laser. Positive current supplied to the IIN lines, through a user-selected external resistor, allow the full scale range of each amplifier to be matched to the full scale range of the users control DACs. When the write laser is selected, and the WEN pins are switched low, the respective current is summed to the output with 1ns rise and fall times. When the CD pin is low, the ROM laserdiode is driven by output IOUT2, and no current will appear at output IOUT1.

The 100mAP-P (max) oscillator is switched on and off by the OSCEN line. The CD line allows the oscillator to operate at different amplitudes and frequencies for each laser.

The entire chip is powered down when ENABLE is low. The user can define the gain of the I/V amplifier. With a slew rate of 200V/us, the I/V amplifier can normally settle to 1% within 30ns.

EL6140 应用

• Combo CD-RW + DVD-ROM
• CD-RW to 16X
• CD-R to 32X
• Writable optical disk drives

EL6140 特点

• Read + 2 write channel laser driver with oscillator and fast I/V amplifier plus a separate ROM laser driver with oscillator
• 200V/us I/V amplifier
• 100X gain, 100mA low noise read channel
• 250X gain, 300mA and 150X gain, 150mA write channels
• 500MHz, 100mAP-P oscillator
• Write rise/fall times = 0.8ns
• Single +5V supply
• Pb-free available (RoHS compliant)

EL6140 芯片订购指南

芯片型号	产品状态	温度范围	封装尺寸图	潮湿敏感度等级MSL	美元价格US $
EL6140CUZ	量产	民用级	24 Ld QSOP	2	价格录入中
EL6140CUZ-T13	量产	民用级	24 Ld QSOP T +R	2	价格录入中
EL6140CUZ-T7	量产	民用级	24 Ld QSOP T +R	2	价格录入中
EL6140CU	停产	民用级	24 Ld QSOP	1	N/A
EL6140CU-T13	停产	民用级	24 Ld QSOP T +R	1	N/A
EL6140CU-T7	停产	民用级	24 Ld QSOP T +R	1	N/A

EL6140 应用技术支持与电子电路设计开发资源下载

1. Interface 接口电路产品选型指南 . pdf