8051-based Microcontroller |
|||
| 芯片型号 | 描述 | ||
| AT89C5130A-M | USB C51-based Microcontroller with 16K Bytes Flash, 1K Byte Data EEPROM, 1280 bytes RAM, Extended Range Power Supply: 2.7V to 5.5V, 7 USB Endpoints, TWI, SPI, UART, PCA | ||
| AT89C5131A-L | USB C51-based Microcontroller with 32K Bytes
Flash, 1K Byte Data EEPROM, 1280 bytes RAM, Low Voltage Range
Power Supply: 3.0V to 3.6V, 7 USB Endpoints, TWI, SPI, UART,
PCA. Recommended device with extended voltage range: AT89C5131A-M (2.7-5.5V). |
||
| AT89C5131A-M | USB C51-based Microcontroller with 32K Bytes Flash, 1K Byte Data EEPROM, 1280 bytes RAM, Extended Range Power Supply: 2.7V to 5.5V, 7 USB Endpoints, TWI, SPI, UART, PCA | ||
| AT89C5132 | USB C51-based Microcontroller with 64K Bytes Flash, 2304 bytes RAM, 4 USB Endpoints, SPI, UART, IDE, TWI, MultiMediaCard, DataFlash, I2S, 10-bit ADC. | ||
AVR-based Flash Microcontroller |
|||
| 芯片型号 | 描述 | ||
| AT90USB1286 | USB Function Microcontroller. 128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
||
| AT90USB1287 | USB On-The-Go (OTG)
Microcontroller. 128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
||
| AT90USB646 | USB Function Microcontroller. 64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
||
| AT90USB647 | USB On-The-Go (OTG)
Microcontroller. 64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
||
AVR-based Function Controller |
|||
| 芯片型号 | 描述 | ||
| AT43USB325 | Multimedia keyboard controller with embedded
4-port hub, 16 Kbytes of program memory, 4 programmable USB
function endpoints, 512 bytes of data SRAM and support for
20x8 keyboard matrix. Available in SRAM and Mask ROM versions.
Please register to download the USB documentation, software and drivers. |
||
| AT43USB326 | USB Multimedia keyboard controller with an
embedded two port hub, 3 programmable USB function endpoints.
16 Kbytes program ROM, 512 bytes SRAM and support for multiple
18 x 8 keyboard matrix.
Please register to download the USB documentation, software and drivers. |
||
| AT43USB353M | Low cost full speed USB microcontroller with
embedded Hub, ADC and PWM.
Please register to download the USB documentation, software and drivers. |
||
| AT43USB351M | Low-/full-speed configurable USB
microcontroller with a 1.5/12/24 MIPS AVR, 5 function
endpoints, 12-channel 10-bit ADC, PWM and 24 Kbytes of program
ROM.
Please register to download the USB documentation, software and drivers. |
||
| AT43USB355 | Full-speed USB microcontroller with a 12 MIPS
AVR, 3 function endpoints, a 2-port Hub and 12-channel 10-bit
ADC, PWM and 24 Kbytes of program SRAM or mask ROM.
Please register to download the USB documentation, software and drivers. |
||
| AT76C712 | High-speed (48 MHz) AVRbased bridging device. This High Speed USB bridge chip includes a USB to serial bridge that supports two 16550 UART modules with 16 bytes FIFOs in each direction. | ||
| AT76C713 | High-speed (48 MHz) AVR microcontroller with USB interface, dual enhanced serial ports, configurable Program and Data Memory space, support of Device Firmware Upgrade (DFU) in bootstrap ROM, external Data Memory interface, two fast UART ports with IrDA coding capabilities and JTAG interface for on-chip debugging. | ||
Dual Role (OTG/Host/Function) Controller |
|||
| 芯片型号 | 描述 | ||
| AT43USB380 | On-The-Go Upgrade of the AT43USB370 USB 2.0
Full-Speed Host/Function Processor. The AT43USB380 provides
three modes of operation: OTG, host, and device. It comes with
32-/16-/8-bit system bus interface with DMA capability. It is
supported by a comprehensive set of USB software suite
including standard USB class drivers.
Please register to download the USB documentation, software and drivers. |
||
Hubs |
|||
| 芯片型号 | 描述 | ||
| AT43301 | Low cost, self- and bus-powered, full-speed HUB controller with ganged port power switching and global overcurrent protection | ||
| AT43312A | Self- and bus-powered, full-speed HUB controller with individual port power switching and global overcurrent protection. SOIC package (AT43312A-SC) is not recommended for new design. | ||
| 芯片型号 | 描述 |
| AT89C5131 | USB C51-based Microcontroller with 32K Bytes
Flash. Not recommended for new design: replaced by AT89C5131A-L (full compatibility) or AT89C5131A-M (extended 2.7-5.5V range). |
| AT43USB370 | Full speed, USB 2.0 compliant host/function
processor with embedded USB host stack and device driver
firmware. Not recommended for new designs replaced by AT43USB380 |
| AT43USB320A | Full speed USB microcontroller with a 12 MIPS
AVR, 3 function endpoints, an embedded 4-port Hub and a UART. Not recommended for new designs |
USB 2.0 全速集线器
|
带集成USB 2.0 低/全 速接口和嵌入集线器的AVR
|
爱特梅尔提供了大量的USB 产品的组合， 包括USB 集线器, 集成了USB 接口的微控制器, 和嵌入式USB 主机。 这些设备被特别设计用于隐藏您的嵌入设计中的USB 协议的复杂性。用户可以得到USB 固件库、范例代码, 和软件设计工具譬如USB向导(基于GUI的源代码生成器)，这将使您的学习更加顺利和保证最短的设计周期和最快的上市时间。