| Devices | writeText(varDescription) Description |
|---|---|
| AT91CAP7E | The AT91CAP7E is a standard ARM7-based microcontroller for use with FPGAs providing easy migration to a custom AT91CAP7 microcontroller one-chip solution. It includes a six-layer advanced high-speed bus (AHB), peripheral DMA controller and 160 Kbytes of on-chip SRAM. On chip peripherals include USB 2.0 full speed device, SPI master and slave, two USARTs, three 16-bit timer counters, an 8-channel/ 10-bit analog to digital converter, plus a full-functioned system controller including interrupt and power control and supervisory functions. |
| AT91CAP7S250A | The AT91CAP7S250A is based on the integration of an ARM7TDMITM processor with 256K bytes of fast ROM and 160K bytes of SRAM memories, together with a set of peripherals and a metal programmable (MP) block of 250K gates of digital logic. The MP block has two 2Kx16 DPRAM blocks that can be tightly coupled to the application-specific logic that requires them. This makes the AT91CAP7S250A an ideal platform for creating custom designs. The AT91CAP7S250A embeds a USB Full-speed Device, and several standard peripherals, such as USARTs, SPI, Timer Counters, and an 8-channel 10-bit ADC. Additional peripherals can be instantiated in the MP Block as needed. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices and up to 90 general-purpose I/O. The AT91CAP7S250A is built around a 6-layer bus matrix, allowing a maximum internal bandwidth of six 32-bit buses. Its peripheral DMA architecture enables multiple data transfers to take place between the memories and peripherals with minimal processor overhead. The AT91CAP7S250A is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel's extensive library of device drivers to reduce the time and cost of application development. The AT91CAP7S250A is available in 144, 176, 208 QFP/BGA and 225 BGA RoHS-compliant packages. |
| AT91CAP7S450A | The AT91CAP7S450A is based on the integration of an ARM7TDMITM processor with 256K bytes of fast ROM and 160K bytes of SRAM memories, together with a set of peripherals and a metal programmable (MP) block of 450K gates of digital logic. The MP block has two 2Kx16 DPRAM blocks that can be tightly coupled to the application-specific logic that requires them. This makes the AT91CAP7S450A an ideal platform for creating custom designs. The AT91CAP7S450A embeds a USB Full-speed Device, and several standard peripherals, such as USARTs, SPI, Timer Counters, and an 8-channel 10-bit ADC. Additional peripherals can be instantiated in the MP Block as needed. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices and up to 90 general-purpose I/O. The AT91CAP7S450A is built around a 6-layer bus matrix, allowing a maximum internal bandwidth of six 32-bit buses. Its peripheral DMA architecture enables multiple data transfers to take place between the memories and peripherals with minimal processor overhead. The AT91CAP7S450A is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel's extensive library of device drivers to reduce the time and cost of application development. The AT91CAP7S450A is available in 144, 176, 208 QFP/BGA and 225 BGA RoHS-compliant packages. |
| AT91CAP9E | The AT91CAP9E (CAP9 Development Chip) is a standard ARM9-based microcontroller for use with FPGAs providing easy migration to a custom AT91CAP9 microcontroller one-chip solution. It is based on the integration of an ARM926EJ-S processor with data/instruction caches, 32K bytes of fast ROM and 32K bytes of SRAM memories, together with a wide range of peripherals and an interface to an external FPGA. The AT91CAP9E embeds a USB High-speed Device, a 2-port USB OHCI Host, an LCD Controller, a 4-channel DMA Controller, and one Image Sensor Interface. It also integrates several standard peripherals, such as USART, SPI, TWI, Timer Counters, PWM generators, Multimedia Card interface, and one CAN Controller. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices. The AT91CAP9E is built around a 12-layer bus matrix, allowing a maximum internal bandwidth of twelve 32-bit buses. Its distributed DMA architecture enables multiple data transfers to take place between the processor, memories and peripherals with minimal processor overhead. The AT91CAP9E is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel's extensive library of device drivers to reduce the time and cost of application development. The AT91CAP9E is supplied in in a 400-ball 17mm X 17mm BGA RoHS-compliant package. |
| AT91CAP9EC | The AT91CAP9EC (CAP9C Development Chip) is a standard ARM9-based microcontroller for use with FPGAs providing easy migration to a custom AT91CAP9SC microcontroller one-chip solution. The AT91CAP9EC is based on the integration of an ARM926EJ-S processor with data/instruction caches, 32K bytes of fast ROM and 32K bytes of SRAM memories, together with security features, a wide range of peripherals, and an interface to an external FPGA. The AT91CAP9EC embeds a USB High-speed Device, a 2-port USB OHCI Host, an LCD Controller, a 4-channel DMA Controller, an Image Sensor Interface, and encryption blocks for AES and Triple DES. It also integrates several standard peripherals, such as USART, SPI, TWI, Timer Counters, PWM generators, Multimedia Card interface, and one CAN Controller. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices. The AT91CAP9EC is built around a 12-layer bus matrix, allowing a maximum internal bandwidth of twelve 32-bit buses. Its distributed DMA architecture enables multiple data transfers to take place between the processor, memories and peripherals with minimal processor overhead. The AT91CAP9EC is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel's extensive library of device drivers to reduce the time and cost of application development. The AT91CAP9EC is supplied in in a 400-ball 17mm X 17mm BGA RoHS-compliant package. |
| AT91CAP9S250A | The AT91CAP9S250A is based on the integration of an ARM926EJ-S processor with data/instruction caches, 32K bytes of fast ROM and 32K bytes of SRAM memories, together with a wide range of peripherals and a metal programmable (MP) block of 250K gates of digital logic. The MP block has a distributed set of local SRAM and DPRAM blocks that can be tightly coupled to the application-specific logic that requires them. This makes the AT91CAP9S250A an ideal platform for creating custom designs. The AT91CAP9S250A embeds a USB High-speed Device, a 2-port USB OHCI Host, an LCD Controller, a 4-channel DMA Controller, and one Image Sensor Interface. It also integrates several standard peripherals, such as USART, SPI, TWI, Timer Counters, PWM generators, Multimedia Card interface, and one CAN Controller. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices. The AT91CAP9S250A is built around a 12-layer bus matrix, allowing a maximum internal bandwidth of twelve 32-bit buses. Its distributed DMA architecture enables multiple data transfers to take place between the processor, memories and peripherals with minimal processor overhead. The AT91CAP9S250A is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel's extensive library of device drivers to reduce the time and cost of application development. The AT91CAP9S250A is supplied in in a 400-ball 17mm X 17mm BGA RoHS-compliant package. |
| AT91CAP9S500A | The AT91CAP9S500A is based on the integration of an ARM926EJ-S processor with data/instruction caches, 32K bytes of fast ROM and 32K bytes of SRAM memories, together with a wide range of peripherals and a metal programmable (MP) block of 500K gates of digital logic. The MP block has a distributed set of local SRAM and DPRAM blocks that can be tightly coupled to the application-specific logic that requires them. This makes the AT91CAP9S500A an ideal platform for creating custom designs. The AT91CAP9S500A embeds a USB High-speed Device, a 2-port USB OHCI Host, an LCD Controller, a 4-channel DMA Controller, and one Image Sensor Interface. It also integrates several standard peripherals, such as USART, SPI, TWI, Timer Counters, PWM generators, Multimedia Card interface, and one CAN Controller. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices. The AT91CAP9S500A is built around a 12-layer bus matrix, allowing a maximum internal bandwidth of twelve 32-bit buses. Its distributed DMA architecture enables multiple data transfers to take place between the processor, memories and peripherals with minimal processor overhead. The AT91CAP9S500A is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel's extensive library of device drivers to reduce the time and cost of application development. The AT91CAP9S500A is supplied in in a 400-ball 17mm X 17mm BGA RoHS-compliant package. |
| AT91CAP9SC250A | The AT91CAP9SC250A is based on the integration of an ARM926EJ-S processor with data/instruction caches, 32K bytes of fast ROM and 32K bytes of SRAM memories, together with security features, a wide range of peripherals, and a metal programmable (MP) block of 250K gates of digital logic. The MP block has a distributed set of local SRAM and DPRAM blocks that can be tightly coupled to the application-specific logic that requires them. This makes the AT91CAP9SC250A an ideal platform for creating custom designs. The AT91CAP9SC250A embeds a USB High-speed Device, a 2-port USB OHCI Host, an LCD Controller, a 4-channel DMA Controller, an Image Sensor Interface, and encryption blocks for AES and Triple DES. It also integrates several standard peripherals, such as USART, SPI, TWI, Timer Counters, PWM generators, Multimedia Card interface, and one CAN Controller. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices. The AT91CAP9SC250A is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel' extensive library of device drivers to reduce the time and cost of applicatiion development. The AT91CAP9SC250A is supplied in a 400-ball 17 mmx 17 mm BGA RoHS-compliant package. |
| AT91CAP9SC500A | The AT91CAP9SC500A is based on the integration of an ARM926EJ-S processor with data/instruction caches, 32K bytes of fast ROM and 32K bytes of SRAM memories, together with security features, a wide range of peripherals, and a metal programmable (MP) block of 500K gates of digital logic. The MP block has a distributed set of local SRAM and DPRAM blocks that can be tightly coupled to the application-specific logic that requires them. This makes the AT91CAP9SC500A an ideal platform for creating custom designs. The AT91CAP9SC500A embeds a USB High-speed Device, a 2-port USB OHCI Host, an LCD Controller, a 4-channel DMA Controller, an Image Sensor Interface, and encryption blocks for AES and Triple DES. It also integrates several standard peripherals, such as USART, SPI, TWI, Timer Counters, PWM generators, Multimedia Card interface, and one CAN Controller. It also features an external memory bus (EBI) capable of interfacing with a wide range of memory devices. The AT91CAP9SC500A is built around a 12-layer bus matrix, allowing a maximum internal bandwidth of twelve 32-bit buses. Its distributed DMA architecture enables multiple data transfers to take place between the processor, memories and peripherals with minimal processor overhead. The AT91CAP9SC500A is fully supported with a development board, industry-standard application development tools, ported operating systems and Atmel's extensive library of device drivers to reduce the time and cost of application development. The AT91CAP9SC500A is supplied in in a 400-ball 17mm X 17mm BGA RoHS-compliant package. |