SSM2301CPZ-REEL
The SSM2301 is a fully integrated, high efficiency, Class-D audio amplifier designed to maximize performance for mobile phone applications. The application circuit requires a minimum of external components and operates from a single 2.5 V to 5.0 V supply. It is capable of delivering 1.4 W of continuous output power with less than 1% THD + N driving an 8 Ω load from a 5.0 V supply.
The SSM2301 features a high efficiency, low noise modulation scheme that does not require external LC output filters. The modu-lation provides high efficiency even at low output power. The SSM2301 operates with 85% efficiency at 1.4 W into 8 Ω from a 5.0 V supply and has a signal-to-noise ratio (SNR) that is greater than 98 dB. Spread-spectrum modulation is used to provide lower EMI-radiated emissions compared with other Class-D architectures.
The SSM2301 has a micropower shutdown mode with a maximum shutdown current of 30 nA. Shutdown is enabled by applying a logic low to the SD pin.
The device also includes pop-and-click suppression circuitry. This minimizes voltage glitches at the output during turn-on and turn-off, thus reducing audible noise on activation and deactivation.
The fully differential input of the SSM2301 provides excellent rejection of common-mode noise on the input. Input coupling capacitors can be omitted if the dc input common-mode voltage is approximately VDD/2.
The SSM2301 also has excellent rejection of power supply noise, including noise caused by GSM transmission bursts and RF rectification. PSRR is typically 63 dB at 217 Hz.
The gain can be set to 6 dB or 12 dB by utilizing the gain control select pin connected respectively to ground or to VDD. Gain can also be adjusted externally by inserting a resistor in series with each input pin.
The SSM2301 is specified over the commercial temperature range (-40°C to +85°C). It has built-in thermal shutdown and output short-circuit protection. It is available in both an 8-lead, 3 mm × 3 mm lead-frame chip scale package (LFCSP) and an 8-lead MSOP package.
SSM2301CPZ-REEL 应用
- Mobile phones
- MP3 players
- Portable gaming
- Portable electronics
- Educational toys
SSM2301CPZ-REEL 特点
- Filterless Class-D amplifier with Σ-Δ modulation
- No sync necessary when using multiple Class-D amplifiers from Analog
- Devices, Inc.
- 1.4 W into 8 Ω at 5.0 V supply with less than 1% THD + N
- 85% efficiency at 5.0 V, 1.4 W into 8 Ω speaker
- Greater than 98 dB SNR (signal-to-noise ratio)
- Single-supply operation from 2.5 V to 5.0 V
- 20 nA ultralow shutdown current
- Short-circuit and thermal protection
- Available in 8-lead, 3 mm × 3 mm LFCSP and MSOP packages
- Pop-and-click suppression
- Built-in resistors reduce board component count
- Fixed and user-adjustable gain configurations
SSM2301CPZ-REEL 功能框图
SSM2301CPZ-REEL 技术指标
| Output Power (W) | 18W | Supply Current | 44mA |
SSM2301 芯片订购指南
| 产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
|---|---|---|---|---|
| SSM2301-EVALZ | 量产 | 评估板 | 工业 | |
| SSM2301-MINI-EVALZ | 量产 | 评估板 | 工业 | |
| SSM2301CPZ-REEL | 量产 | 8 ld LFCSP (3x3mm) | 8 | 工业 |
| SSM2301CPZ-REEL7 | 量产 | 8 ld LFCSP (3x3mm) | 8 | 工业 |
| SSM2301RMZ-REEL | 量产 | 8 | 工业 | |
| SSM2301RMZ-REEL7 | 量产 | 8 | 工业 |