The AD7450A/AD7440 are respectively 12- and 10-bit, high speed, low power, successive-approximation (SAR) analog-to-digital converters that feature a fully differential analog input. These parts operate from a single 3 V or 5 V power supply and feature throughput rates up to 1 MSPS.
The parts contains a low-noise, wide bandwidth, differential track and hold amplifier (T/H), which can handle input frequencies in excess of 1 MHz with the –3 dB point being 20 MHz typically. The reference voltage is applied externally to the VREF pin and can be varied from 100 mV to 3.5 V depending on the power supply and what suits the application. The value of the reference voltage determines the common mode voltage range of the part. With this truly differential input structure and variable reference input, the user can select a variety of input ranges and bias points.
AD7450A/AD7440分别是12位和10位、高速、低功耗、逐次逼近(SAR)型模数转换器(ADC),采用全差分模拟输入,工作电压为3 V或5 V单电源,最高呑吐量可达1 MSPS。
这些器件内置一个低噪声、宽带宽、差分采样保持(T/H)放大器,可处理1 MHz以上的输入频率,-3dB带宽典型值为20MHz。 外部基准电压通过VREF引脚输入,可在100 mV至3.5 V范围内变化,具体取决于电源和应用。基准电压值决定器件的共模电压范围。利用这一真差分输入结构和可变基准电压输入,用户可以选择各种输入范围和偏置点。
Resolution (Bits) | 10bit | Interface | Ser,SPI |
T-Put Rate | 1MSPS | Ain Range | (2Vref) p-p |
# Chan | 4 | SNR (dB) | n/a |
Supply V | Single(+3),Single(+5) | Pkg Type | SOT |
Pwr Diss (max) | 9mW | -- | -- |
产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
---|---|---|---|---|
AD7440BRM-REEL7 | 量产 | 8 ld MSOP | 8 | 工业 |
AD7440BRMZ | 量产 | 8 ld MSOP | 8 | 工业 |
AD7440BRTZ-R2 | 量产 | 8 ld SOT-23 | 8 | 工业 |
AD7440BRTZ-REEL7 | 量产 | 8 ld SOT-23 | 8 | 工业 |
EVAL-AD7440CB | 量产 | 评估板 | - | 待定 |