The ADM6316/ADM6317/ADM6318/ADM6319/ADM6320/ ADM6321/ADM6322 are supervisory circuits that monitor power supply voltage levels and code execution integrity in microprocessor-based systems. As well as providing power- on reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also be asserted by an external push button through a manual reset input. The seven parts feature different combinations of watchdog input, manual reset input, and output stage configuration, as shown in Table 1.
Each part is available in a choice of 26 reset threshold options ranging from 2.5 V to 5 V in 100 mV increments. There are also four reset timeout options of 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) and four watchdog timeout options of 6.3 ms, 102 ms, 1600 ms, and 25.6 sec (typical).
The ADM6316/ADM6317/ADM6318/ADM6319/ADM6320/ ADM6321/ADM6322 are available in 5-lead SOT-23 packages and typically consume only 3 μA, making them suitable for use in low power portable applications.
ADM6316/ADM6317/ADM6318/ADM6319/ADM6320/ ADM6321/ADM6322是基于微处理器的系统中用来监控电源电压级别和代码执行完整性的监控电路。微处理器在预设的超时周期内未能选通时,片上看门狗定时器可对微处理器进行复位,同时可提供上电复位信号。还可以通过一个外部按钮进行手动复位输入来发出复位信号申明。这七款器件具有不同的看门狗输入、手动复位输入和输出级配置组合,如表1所示。
每款器件都提供26个复位阀值选项,范围为2.5 V至5 V,增量为100 mV。还提供1 ms、20 ms、140 ms和1120 ms(最小值)四个复位超时选项以及6.3 ms、102 ms、1600 ms和25.6 s(典型值)四个看门狗超时选项。
ADM6316/ADM6317/ADM6318/ADM6319/ADM6320/ ADM6321/ADM6322采用5引脚SOT-23封装,耗电流仅为3 μA(典型值),这使其适合用于低功耗便携式应用。
产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
---|---|---|---|---|
ADM6321AY43ARJZ-R7 | 量产 | 5 ld SOT-23 | 5 | 工业 |
ADM6321BZ25ARJZ-R7 | 量产 | 5 | 工业 | |
ADM6321CY46ARJ-RL7 | 量产 | 5 ld SOT-23 | 5 | 工业 |
ADM6321CY46ARJZ-R7 | 量产 | 5 ld SOT-23 | 5 | 工业 |