首页 > ADI 模拟器件公司 > 接口电路 > RS-485接口

ADM483: 5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver

The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus trans-mission lines. It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driver and a differential line receiver. Both share the same differential pins, with either the driver or the receiver being enabled at any given time.

The device has an input impedance of 12 kOhm, allowing up to 32 transceivers on one bus. Since only one driver should be enabled at any time, the output of a disabled or powered-down driver is three-stated to avoid overloading the bus. This high impedance driver output is maintained over the entire common-mode voltage range from –7 V to +12 V.

The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).

The driver outputs are slew-rate limited to reduce EMI and data errors caused by reflections from improperly terminated buses. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit.

The part is fully specified over the industrial temperature range, and is available in an 8-lead SOIC package.

ADM483 特点
ADM483 功能框图

ADM483 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADM483AR 量产 8 ld SOIC 8 工业
ADM483AR-REEL7 量产 8 ld SOIC 8 工业
ADM483ARZ 量产 8 ld SOIC 8 工业
ADM483JR 量产 8 ld SOIC 8 工业
ADM483JR-REEL7 量产 8 ld SOIC 8 工业
ADM483JRZ 量产 8 ld SOIC 8 工业
ADM483 应用技术支持与电子电路设计开发资源下载
  1. ADM483 数据手册DataSheet 下载 . PDF
  2. ADI 模拟器件公司比较器产品选型指南 . PDF
  3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .PDF