首页 > ADI 模拟器件公司 > 接口电路 > RS-485接口

ADM2482E: Signal Isolated RS-485 Transceiver Full/Half Duplex w/ Transformer Driver

The ADM2482E/ADM2487E are isolated data transceivers with ±15 kV ESD protection and are suitable for high speed, half-duplex or full-duplex communication on multipoint transmission lines. For half-duplex operation, the transmitter outputs and receiver inputs share the same transmission line. Transmitter Output Pin Y is linked externally to Receiver Input Pin A, and Transmitter Output Pin Z to Receiver Input Pin B. The parts are designed for balanced transmission lines and comply with TIA/EIA- 485-A-98 and ISO 8482:1987(E). The devices employ the Analog Devices, Inc., iCoupler(R) technology to combine a 3-channel isolator, a three-state differential line driver, and a differential input receiver into a single package. An on-chip oscillator outputs a pair of square waveforms that drive an external transformer to provide isolated power. The logic side of the device can be powered with either a 5 V or a 3.3 V supply, and the bus side is powered with an isolated 3.3 V supply.

The ADM2482E/ADM2487E driver has an active high enable, and the receiver has an active low enable. The driver output enters a high impedance state when the driver enable signal is low. The receiver output enters a high impedance state when the receiver enable signal is high.

The device has current-limiting and thermal shutdown features to protect against output short circuits and situations where bus contention might cause excessive power dissipation. The part is fully specified over the industrial temperature range of -40°C to +85°C and is available in a 16-lead, wide-body SOIC package.

产品应用领域 Applications
ADM2482E 特点
ADM2482E 功能框图

ADM2482E 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADM2482EBRWZ 量产 16 工业
ADM2482EBRWZ-REEL7 量产 16 工业
EVAL-ADM2482EEB3Z 量产 评估板 10 待定
EVAL-ADM2482EEB5Z 量产 评估板 10 待定
ADM2482E 应用技术支持与电子电路设计开发资源下载
  1. ADM2482E 数据手册DataSheet 下载 . PDF
  2. ADI 模拟器件公司比较器产品选型指南 . PDF
  3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .PDF