ADL5350: LF to 4 GHz High Linearity Y-Mixer
The ADL5350 is a high linearity, up-and-down converting mixer capable of operating over a broad input frequency range. It is well suited for demanding cellular base-station mixer designs that require high sensitivity and effective blocker immunity. Based on a GaAs pHEMT, single-ended mixer architecture, the ADL5350 provides excellent input linearity and low noise figure without the need for a high power level local oscillator (LO) drive.
In 850 MHz/900 MHz receive applications, the ADL5350 provides a typical conversion loss of only 6.8 dB. The integrated LO amplifier allows a low LO drive level, typically only 4 dBm for most applications. The input IP3 is typically greater than 25 dBm, with an input compression point of 19 dBm. The high input linearity of the ADL5350 makes the device an excellent mixer for communications systems that require high blocker immunity, such as GSM 850/900 and 800 MHz CDMA2000. At 2 GHz, a slightly greater supply current is required to obtain similar performance.
The single-ended broadband RF/IF port allows the device to be customized for a desired band of operation using simple external filter networks. The LO to RF isolation is based on the LO rejection of the RF port filter network. Greater isolation may be achieved by using higher order filter networks, as described in the Applications Information section of this data sheet.
The ADL5350 is fabricated on a GaAs pHEMT, high performance IC process. The ADL5350 is available in a 3 mm x 2 mm 8-lead LFCSP. It operates over a -40°C to +85°C temperature range. An evaluation board is also available.
产品应用领域 Applications
- Cellular base station
- Point-to-point radio links
- RF instrumentation
ADL5350 特点
- Broadband radio frequency (RF), intermediate frequency (IF), and local oscillator (LO) ports
- Conversion loss: 6.8 dB
- Noise figure: 6.5 dB
- High input IP3: 25 dBm
- High input P1dB: 19 dBm
- Low LO drive level
- Single-ended design: no need for baluns
- Single-supply operation: 3 V @ 19 mA
- Miniature, 2 mm × 3 mm, 8-lead LFCSP
- RoHS compliant
ADL5350 功能框图
| 产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
|---|---|---|---|---|
| ADL5350-EVALZ | 量产 | 评估板 | 24 | 工业 |
| ADL5350ACPZ-R2 | 量产 | 8 ld LFCSP (2x3x.85mm) | 8 | 工业 |
| ADL5350ACPZ-R7 | 量产 | 8 ld LFCSP (2x3x.85mm) | 8 | 工业 |
| ADL5350ACPZ-WP | 量产 | 8 ld LFCSP (2x3x.85mm) | 8 | 工业 |