首页 > ADI 模拟器件公司 > 开关和多路复用器 > 模拟开关

ADG1611: 1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Quad SPST Switches

The ADG1611/ADG1612/ADG1613 contain four independent single-pole/single-throw (SPST) switches. The ADG1611 and ADG1612 differ only in that the digital control logic is inverted. The ADG1611 switches are turned on with Logic 0 on the appro priate control input, while Logic 1 is required for the ADG1612 switches. The ADG1613 has two switches with digital control logic similar to that of the ADG1611; the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. The ADG1613 exhibits break-before-make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs. The ultralow on resistance of these switches make them ideal solutions for data acquisition and gain switching applications where low on resistance and distortion is critical. The on-resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals. The CMOS construction ensures ultralow power dissipation, making them ideally suited for portable and battery-powered instruments.

Applications
ADG1611 特点
ADG1611 功能框图

ADG1611 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADG1611BCPZ-REEL 量产 16 ld LFCSP (4x4mm, 2.50mm exposed pad) 16 待定
ADG1611BCPZ-REEL7 量产 16 ld LFCSP (4x4mm, 2.50mm exposed pad) 16 待定
ADG1611BRUZ 量产 16 ld TSSOP 16 待定
ADG1611BRUZ-REEL 量产 16 ld TSSOP 16 待定
ADG1611BRUZ-REEL7 量产 16 ld TSSOP 16 待定
ADG1611 应用技术支持与电子电路设计开发资源下载
  1. ADG1611 数据手册DataSheet下载. pdf
  2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .PDF
  3. ADC模数转换器选型指南 . PDF