首页 > ADI 模拟器件公司 > 军用和航空产品

AD9042S: 航空航天用12位41 MSPS ADC

AD9042 功能框图AD9042S 是一款高速、高性能、低功耗、12位单芯片模数转换器。芯片上集成了全部必需功能,包括采样保持(T/H)和基准电压源,可提供完整的信号转换解决方案。该器件采用+5 V单电源供电,以41 MSPS采样速率提供CMOS兼容数字输出。AD9042专为满足宽带、多通道接收器的需要而设计,在20 MHz带宽内保持80 dB的无杂散动态范围(SFDR)。噪声性能也很出色,信噪比典型值为68 dB。AD9042采用ADI公司的高速互补双极性工艺(XFCB)制造,并使用创新的多通架构。它采用28引脚DIP封装,这种共烧陶瓷定制封装形成多层基板,内部旁路电容和9042裸片安装其上。

The AD9042 is a high speed, high performance, low power, monolithic 12-bit analog-to-digital converter. All necessary functions, including track-and-hold (T/H) and reference are included on chip to provide a complete conversion solution. The AD9042 runs off of a single +5 V supply and provides CMOS-compatible digital outputs at 41 MSPS.Designed specifically to address the needs of wideband, multichannel receivers, the AD9042 maintains 80 dB spurious-free dynamic range (SFDR) over a bandwidth of 20 MHz. Noise performance is also exceptional; typical signal-to-noise ratio is 68 dB.The AD9042 is built on Analog Devices' high speed complementary bipolar process (XFCB) and uses an innovative multipass architecture. Units are packaged in a 28-pin DIP; this custom cofired ceramic package forms a multilayer substrate to which internal bypass capacitors and the 9042 die are attached.

AD9042S 特点
  • 采样速率:41 MSPS(最小值)
  • 无杂散动态范围:80 dB
  • 功耗:595 mW(典型值)
  • +5 V单电源
  • 片内集成采样保持器和基准电压源
  • 输出格式:二进制补码
  • CMOS兼容输出电平
  • 41 MSPS Minimum Sample Rate
  • 80 dB Spurious-Free Dynamic Range
  • 595 mW Power Dissipation typical
  • Single +5 V Supply
  • On-Chip T/H and Reference
  • Two's Complement Output Format
  • CMOS-Compatible Output Levels
AD9042S 芯片订购指南
产品型号 封装 引脚 温度范围 包装和数量 报价*(100-499) 报价*1000 pcs
5962R0253801VXA 产品状态: 量产 S/B OR B/B CERAMIC DIP 28 军用 Tube, 13 - -
5962R0253801VZA 产品状态: 量产 CER. FLATPACK WITH LEADS 28 军用 Tray, 15 - -
AD9042S 应用技术支持与电子电路设计开发资源下载
  1. ADI 模拟器件公司比较器产品选型指南 . PDF
  2. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .PDF