首页 > ADI 模拟器件公司 > 军用和航空产品

AD844S: Aerospace 60 MHz, 2000V/μS Op Amp

The AD844 is a high speed monolithic operational amplifier fabricated using Analog Devices' junction isolated complementary bipolar (CB) process. It combines high bandwidth and very fast large signal response with excellent dc performance. Although optimized for use in current to voltage applications and as an inverting mode amplifier, it is also suitable for use in many non-inverting applications.

The AD844 can be used in place of traditional op amps, but its current feedback architecture results in much better ac performance, high linearity and an exceptionally clean pulse response.

This type of op amp provides a closed-loop bandwidth which is determined primarily by the feedback resistor and is almost independent of the closed-loop gain. The AD844 is free from the slew rate limitations inherent in traditional op amps and other current-feedback op amps. Peak output rate of change can be over 2000 V/us for a full 20 V output step. Settling time is typically 100 ns to 0.1%, and essentially independent of gain. The AD844 can drive 50 Ohm loads to ±2.5 V with low distortion and is short circuit protected to 80 mA.

AD844S 特点
AD844S 功能框图

AD844S 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
5962-8964401V2A 量产 LCC:CER LEADLESS CHIP CARR 20 军用
5962-8964401VPA 量产 CERDIP GLASS SEAL 8 军用
5962R8964401V2A 量产 LCC:CER LEADLESS CHIP CARR 20 军用
5962R8964401VPA 量产 CERDIP GLASS SEAL 8 军用
AD844S 应用技术支持与电子电路设计开发资源下载
  1. AD844S 数据手册DataSheet 下载 . PDF
  2. ADI 模拟器件公司比较器产品选型指南 . PDF
  3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .PDF