AD7863: 双核、175 kSPS、14位同时采样ADC
AD7863是一款高速、低功耗、双核14位模数转换器（ADC）,采用5 V单电源供电。该器件内置两个5.2微秒（us）逐次逼近型ADC、两个采样保持放大器、一个2.5 V内部基准电压源和一个高速并行接口。4个模拟输入组成2个通道（A和B）,通过A0输入选择通道。每个通道的两个输入（VA1与VA2或VB1与VB2）可同时进行采样和转换,从而保留这两个模拟输入上的信号相对相位信息。该器件可接受的模拟输入范围为±10 V （AD7863-10）、±2.5 V （AD7863-3）和0 V至2.5 V （AD7863-2）。模拟输入均具有过压保护,允许输入电压分别达到±17 V、±7 V或+7 V而不会造成损坏。
单一转换开始信号（CONVST）同时将两个采样保持放大器置于保持状态,并启动两个通道上的转换操作。BUSY信号表示转换结束,此时便可读取两个通道的转换结果。转换结束后的第一次读取操作访问VA1或VB1的结果,而第二次读取操作访问VA2或VB2的结果,具体取决于多路复用器选择（A0）是低电平还是高电平。该器件的读取数据通过具有标准CS和RD信号的14位并行数据总线进行。除线性度、增益和失调误差等传统直流精度规格外,该器件的动态性能参数也做了详细规定,包括谐波失真和信噪比。AD7863采用ADI公司的线性兼容CMOS （LC2MOS）工艺制造,这是一种将精密的双极性电路与低功耗CMOS逻辑结合在一起的混合工艺技术。它提供28引脚SOIC_W和SSOP两种封装。
The AD7863 is a high speed, low power, dual 14-bit analog-to-digital converter that operates from a single 5 V supply.
The part contains two 5.2 μs successive approximation ADCs, two track/hold amplifiers, an internal 2.5 V reference and a high speed parallel interface. Four analog inputs are grouped into two channels (A and B) selected by the A0 input. Each channel has two inputs (VA1 and VA2 or VB1 and VB2) that can be sampled and converted simultaneously, thus preserving the relative phase information of the signals on both analog inputs. The part accepts an analog input range of ±10 V (AD7863-10), ±2.5 V (AD7863-3), and 0 V to 2.5 V (AD7863-2). Overvoltage protection on the analog inputs for the part allows the input voltage to go to ±17 V, ±7 V, or +7 V respectively, without causing damage.A single conversion start signal (CONVST) simultaneously places both track/holds into hold and initiates conversion on both channels. The BUSY signal indicates the end of conversion and at this time the conversion results for both channels are available to be read. The first read after a conversion accesses the result from VA1 or VB1, and the second read accesses the result from VA2 or VB2, depending on whether the multiplexer select (A0) is low or high, respectively. Data is read from the part via a 14-bit parallel data bus with standard CS and RD signals. In addition to the traditional dc accuracy specifications such as linearity, gain, and offset errors, the part is also specified for dynamic performance parameters including harmonic distortion and signal-to-noise ratio.The AD7863 is fabricated in the Analog Devices, Inc. linear compatible CMOS (LC2MOS) process, a mixed technology process that combines precision bipolar circuits with low power CMOS logic. It is available in 28-lead SOIC_W and SSOP.
AD7863 特点
- Two fast 14-bit ADCs
- Four input channels
- Simultaneous sampling and conversion
- 5.2 μs conversion time
- Single supply operation
- High speed parallel interface
- Low power, 70 mW typical
- Selection of input ranges
±10 V for AD7863-10
±2.5 V for AD7863-3
0 V to 2.5 V for AD7863-2 - Power saving mode, 105 μW maximum
- Overvoltage protection on analog inputs
- 14-bit lead compatible upgrade to AD7862
- 2个快速14位ADC
- 4个输入通道
- 同时采样和转换
- 转换时间：5.2 us
- 单电源供电
- 高速并行接口
- 低功耗：70 mW（典型值）
- 输入范围选择：
±10 V （AD7863-10）
±2.5 V （AD7863-3）
0 V至2.5 V （AD7863-2） - 省电模式：105 uW（最大值）
- 模拟输入过压保护
- AD7862的14位引脚兼容升级版
AD7863 技术指标
- Resolution (Bits): 14bit
- # Chan: 4
- Sample Rate: 175kSPS
- Interface: Par
- Analog Input Type: SE-Bip,SE-Uni
- Ain Range: Bip 10V,Bip 2.5V,Uni 2.5V
- ADC Architecture: SAR
- Pkg Type: SOIC,SOP
AD7863 亮点
- The AD7863 features two complete ADC functions allowing simultaneous sampling and conversion of two channels. Each ADC has a two-channel input mux. The conversion result for both channels is available 5.2 μs after initiating conversion.
- The AD7863 operates from a single 5 V supply and consumes 70 mW typical. The automatic power-down mode, where the part goes into power-down once conversion is complete and wakes up before the next conversion cycle, makes the AD7863 ideal for battery-powered or portable applications.
- The part offers a high speed parallel interface for easy connection to microprocessors, microcontrollers, and digital signal processors.
- The part is offered in three versions with different analog input ranges. The AD7863-10 offers the standard industrial input range of ±10 V; the AD7863-3 offers the common signal processing input range of ±2.5 V, while the AD7863-2 can be used in unipolar 0 V to 2.5 V applications.
- The part features very tight aperture delay matching between the two input sample and hold amplifiers.
- AD7863具备两个完整的ADC功能,可以实现两个通道同时采样和转换,每个ADC均具有一个双通道输入多路复用器,转换启动5.2 us后便可获得两个通道的转换结果
- AD7863采用5 V单电源供电,典型功耗为70 mW,还具有自动省电模式,即器件在完成转换后进入省电模式,在下一转换周期开始之前唤醒,因而非常适合电池供电或便携式应用。
- 该器件具有一个高速并行接口,可轻松与微处理器、微控制器和数字信号处理器进行接口。
- 该器件有三种版本,各版本的模拟输入范围不同。AD7863-10采用±10 V标准工业输入范围,AD7863-3采用±2.5 V通用信号处理输入范围,而AD7863-2则可用于单极性0 V 至 2.5 V应用中。
- 该器件的两个输入采样保持放大器之间具备高匹配度的孔径延迟。
AD7863 功能框图
AD7863 芯片订购指南
| 产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
|---|---|---|---|---|
| AD7863AR-10 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863AR-10REEL | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863AR-2 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863AR-2REEL7 | 量产 | 28 ld SOIC - Wide | 28 | 商业 |
| AD7863AR-3 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863AR-3REEL | 量产 | 28 ld SOIC - Wide | 28 | 商业 |
| AD7863AR-3REEL7 | 量产 | 28 ld SOIC - Wide | 28 | 商业 |
| AD7863ARS-10 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARS-10REEL | 停产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARS-10REEL7 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARS-2 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARS-2REEL | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARS-2REEL7 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARS-3 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARS-3REEL7 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-10 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-10REEL | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-10REEL7 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863ARSZ-2 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-2REEL | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-2REEL7 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-3 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-3REEL | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARSZ-3REEL7 | 量产 | 28 ld SSOP | 28 | 工业 |
| AD7863ARZ-10 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863ARZ-10REEL | 量产 | 28 ld SOIC - Wide | 28 | 商业 |
| AD7863ARZ-10REEL7 | 量产 | 28 ld SSOP | 28 | 商业 |
| AD7863ARZ-2 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863ARZ-2REEL | 量产 | 28 ld SOIC - Wide | 28 | 商业 |
| AD7863ARZ-2REEL7 | 量产 | 28 ld SOIC - Wide | 28 | 商业 |
| AD7863ARZ-3 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863BR-10 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863BR-3 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863BR-3REEL7 | 量产 | 28 ld SOIC - Wide | 28 | 商业 |
| AD7863BRZ-10 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
| AD7863BRZ-3 | 量产 | 28 ld SOIC - Wide | 28 | 工业 |
AD7863 应用技术支持与电子电路设计开发资源下载
- AD7863 数据手册DataSheet下载 .PDF
- Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .PDF
- ADC模数转换器选型指南 . PDF