首页 > ADI 模拟器件公司 > 数据转换器 > ADC 模数转换器

AD7610BSTZ:16位、250 kSPS、单极性/双极性可编程输入PulSAR(R) ADC

AD7610是一款16位电荷再分配逐次逼近型寄存器(SAR)架构的模数转换器(ADC),采用ADI公司的iCMOS高电压工艺制造。该器件的输入范围和工作模式可通过硬件或专用只写串行配置端口来配置。AD7610内置一个16位高速采样ADC、一个内部转换时钟、一个内部基准电压源(和缓冲)、纠错电路,以及串行和并行系统接口端口。在CNVST的下降沿,它对IN+和IN-之间的电压差进行采样。AD7610采用四种不同的模拟输入范围:0 V至5 V、0 V至10 V、±5 V和±10 V,功耗与吞吐量呈线性比例关系。该器件提供无铅48引脚薄型四方扁平封装(LQFP)和引脚架构芯片级封装(LFCSP_VQ)两种形式。工作温度范围为-40°C至+85°C。

The AD7610 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.'s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only serial configuration port for input range and operating mode. The AD7610 contains a high speed 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and both serial and parallel system interface ports. A falling edge on CNVST samples the analog input on IN+ with respect to a ground sense, IN-. The AD7610 features four different analog input ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V. Power consumption is scaled linearly with throughput. The device is available in Pb-free 48-lead, low-profile quad flat package (LQFP) and a lead frame chip-scale (LFCSP_VQ) package. Operation is specified from -40°C to +85°C.

产品应用领域 Applications
产品应用领域 Applications
AD7610BSTZ 特点
AD7610BSTZ 功能框图

AD7610 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
AD7610BCPZ Prodn 48 ld LFCSP 7x7mm (5.25EP) 48 工业
AD7610BCPZ-RL Prodn 48 ld LFCSP 7x7mm (5.25EP) 48 工业
AD7610BSTZ Prodn 48 ld LQFP 48 工业
AD7610BSTZ-RL Prodn 48 ld LQFP 48 工业
EVAL-AD7610CB Obs EVALUATION BOARDS - 工业
EVAL-AD7610CBZ Prodn EVALUATION BOARDS - 工业
AD7610BSTZ 应用技术支持与电子电路设计开发资源下载
  1. AD7610 数据手册DataSheet下载. pdf
  2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .PDF
  3. ADC模数转换器选型指南 . PDF