AD7457是一款12位低功耗、逐次逼近型(SAR)模数转换器(ADC),采用伪差分模拟输入,工作电压为2.7V至5.25V单电源,最高呑吐量可达100 kSPS。
.xian { text-decoration: overline;} 该器件内置一个低噪声、宽带宽、差分采样/保持放大器(T/H),可处理1 MHz以上的输入频率。AD7457的基准电压由外部施加于VREF引脚,电压范围为100mV至VDD,取决于具体应用。转换过程和数据采集过程通过CS和串行时钟进行控制,从而为器件与微处理器或DSP接口创造了条件。此类器件采用SAR架构,可确保无流水线延迟。AD7457采用先进的设计技术,可实现极低的功耗。
The AD7457 is a 12-bit, low power, successive-approximation (SAR) analog-to-digital converter that features a pseudo differential analog input. This part operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 100 kSPS.
The part contains a low-noise, wide bandwidth, differential track and hold amplifier (T/H) which can handle input frequencies in excess of 1 MHz. The reference voltage for the AD7457 is applied externally to the VREF pin and can range from 100mV to VDD, depending on what suits the application.
The conversion process and data acquisition are controlled using and the serial clock allowing the device to interface with Microprocessors or DSPs.The SAR architecture of these parts ensures that there are no pipeline delays.The AD7457 uses advanced design techniques to achieve very low power dissipation
Resolution (Bits) | 12bit | Interface | Ser,SPI |
T-Put Rate | 100kSPS | Ain Range | (Vref) p-p |
# Chan | 1 | SNR (dB) | 71dB |
Supply V | Single(+3),Single(+3.3),Single(+5) | Pkg Type | SOT |
Pwr Diss (max) | 3mW | -- | -- |
产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
---|---|---|---|---|
AD7457BRTZ-REEL7 | 量产 | 8 ld SOT-23 | 8 | 工业 |