AD7366BRUZ-5500RL7: 真双极性输入、12位、双通道、同时采样SAR ADC

The AD7366-5/AD7367-5 are dual, 12-/14-bit, low power, successive approximation analog-to-digital converters (ADCs) that feature throughput rates up to 500 kSPS. Each device contains two ADCs, which are both preceded by a 2-channel multiplexer, and a low noise, wide bandwidth, track-and-hold amplifier.

The AD7366-5/AD7367-5 are fabricated on the Analog Devices, Inc., industrial CMOS process (iCMOS(R))2, which is a technology platform combining the advantages of low and high voltage CMOS. The process allows the parts to accept high voltage bipolar signals in addition to reducing power consumption and package size. The AD7366-5/AD7367-5 can accept true bipolar analog input signals in the ±10 V range, ±5 V range, and 0 V to +10 V range.

The devices have an on-chip 2.5 V reference that can be disabled to allow the use of an external reference. If a 3 V reference is applied to the DCAPA and DCAPB pins, the AD7366-5/AD7367-5 can accept a true bipolar ±12 V analog input. Minimum ±12 V VDD and VSS supplies are required for the ±12 V input range.

AD7366-5/AD7367-51是双核12位/14位、低功耗、逐次逼近型模数转换器(ADC),最高吞吐量为500 KSPS。每个器件内置两个ADC,两者之前均配有一个双通道多路复用器及一个低噪声、宽带宽采样保持放大器。

AD7366-5/AD7367-5采用ADI公司的工业CMOS工艺(iCMOS(R) )2制造,该技术平台兼具低电压和高电压CMOS的优点。利用该工艺,这些器件不仅降低了功耗和封装尺寸,而且能接受高电压双极性信号。AD7366-5/AD7367-5可以输入± 10 V范围、± 5 V范围及0 V至+10 V范围内的真双极性模拟信号。

这些器件具有2.5 V的片内基准电压,可以禁用该电压以便使用外部基准电压。如果将3 V基准电压施加于DCAPA和DCAPB引脚,则AD7366-5/AD7367-5就能接受± 12 V真双极性模拟输入。对于± 12 V输入范围,需要采用最低± 12 V的 VDD 和 VSS电源。

产品焦点 Product Highlights

1. True bipolar analog input signals can be accepted, as well as ±10 V, ±5 V, ±12 V (with external reference), and 0 V to +10 V unipolar signals.
2. Two complete ADC functions allow simultaneous sampling and conversion of two channels.
3. A 500 kSPS serial interface is SPI-/QSPITM-/MICROWIRETM-/ DSP-compatible.
4. 可以输入真双极性模拟信号以及± 10 V、± 5 V、± 12 V（使用外部基准电压）和0 V 至 +10 V范围内的单极性信号。
5. 具备两个完整的ADC功能,可以实现两个通道同时采样和转换。
6. 500 kSPS串行接口,SPI-/QSPITM-/MICROWIRETM-/DSP兼容

AD7366BRUZ-5500RL7 特点

• Dual 12-bit, 2-channel ADC
• True bipolar analog inputs
• Programmable input ranges
  ±10 V, ±5 V, 0 V to +10 V
  ±12 V with +3 V external reference
• Throughput rate: 500 kSPS
• High analog input impedance
• Low current consumption
  5.1 mA typical in normal mode
  320 nA typical in shutdown mode
• Simultaneous conversion with read in less than 2 us
• AD7366-5
  72 dB SNR at 50 kHz input frequency
  12-bit no missing codes
• Accurate on-chip reference: 2.5 V ± 0.2%
• –40°C to +85°C operation
• High speed serial interface
  SPI-/QSPITM-/MICROWIRETM-/DSP-compatible
• iCMOS process technology
• 双核12位、双通道ADC
• 真双极性模拟输入
• 可编程输入范围
  ± 10 V、 ± 5 V、0 V 至 +10 V
  ± 12 V（使用+3 V外部基准电压）
• 吞吐量：500 Ksps
• 高模拟输入阻抗
• 低功耗
  正常模式下为5.1 mA（典型值）
  关断模式下为320 nA（典型值）
• 转换与读取同时进行,间隔小于2us
• AD7366-5
  信噪比：72 dB（50 kHz输入频率）
  12位无失码
• 精密片内基准电压：2.5 V ± 0.2%
• 工作温度：-40°C至+85°C
• 高速串行接口
  SPI-/QSPITM-/MICROWIRETM-/DSP兼容
• iCMOS工艺技术

AD7366BRUZ-5500RL7 功能框图

AD7366-5 芯片订购指南

产品型号	产品状态	封装	引脚	温度范围
AD7366BRUZ-5	量产	24 ld TSSOP	24	工业
AD7366BRUZ-5-RL7	量产	24 ld TSSOP	24	工业
AD7366BRUZ-5500RL7	量产	24 ld TSSOP	24	工业

AD7366BRUZ-5500RL7 应用技术支持与电子电路设计开发资源下载

1. AD7366-5 数据手册DataSheet下载. pdf
2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .PDF
3. ADC模数转换器选型指南 . PDF