AD594CQ: Monolithic Thermocouple Amplifier with Cold Junction Compensation Pretrimmed for Type J Thermocouples

The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a thermocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output.

The AD594/AD595 includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible format which includes TTL drive capability.

The AD594/AD595 can be powered from a single ended supply (including +5 V) and by including a negative supply, temperatures below 0°C can be measured. To minimize self-heating, an unloaded AD594/AD595 will typically operate with a total supply current 160 uA, but is also capable of delivering in excess of ±5 mA to a load.

The AD594 is precalibrated by laser wafer trimming to match the characteristic of type J (iron-constantan) thermocouples and the AD595 is laser trimmed for type K (chromel-alumel) inputs. The temperature transducer voltages and gain control resistors are available at the package pins so that the circuit can be recalibrated for the thermocouple types by the addition of two or three resistors. These terminals also allow more precise calibration for both thermocouple and thermometer applications.

The AD594/AD595 is available in two performance grades. The C and the A versions have calibration accuracies of ±1°C and ±3°C, respectively. Both are designed to be used from 0°C to +50°C, and are available in 14-pin, hermetically sealed, side-brazed ceramic DIPs as well as low cost cerdip packages.

AD594CQ 特点

• Pretrimmed for Type J (AD594) or Type K (AD595) Thermocouples
• Can Be Used with Type T Thermocouple Inputs
• Low Impedance Voltage Output: 10 mV/°C
• Built-In Ice Point Compensation
• Wide Power Supply Range: +5 V to ±15 V
• Low Power: <1 mW typical
• Thermocouple Failure Alarm
• Laser Wafer Trimmed to 1°C Calibration Accuracy
• Setpoint Mode Operation
• Self-Contained Celsius Thermometer Operation
• High Impedance Differential Input
• Side-Brazed DIP or Low Cost Cerdip

AD594CQ 功能框图

AD594 芯片订购指南

产品型号	产品状态	封装	引脚	温度范围
AD594AD	量产	14 ld Bottom-Brazed CerDIP	14	工业
AD594ADZ	量产	14 ld Bottom-Brazed CerDIP	14	工业
AD594AQ	量产	14 ld CerDIP	14	工业
AD594CD	量产	14 ld Bottom-Brazed CerDIP	14	工业
AD594CDZ	量产	14 ld Bottom-Brazed CerDIP	14	工业
AD594CQ	量产	14 ld CerDIP	14	工业

AD594CQ 应用技术支持与电子电路设计开发资源下载

1. AD594 数据手册DataSheet 下载 . PDF
2. ADI 模拟器件公司比较器产品选型指南 . PDF
3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .PDF