首页 > ADI 模拟器件公司 > 军用和航空产品

AD567: 12-Bit Current Output, Microprocessor-Compatible DAC

The AD567 is a complete high speed 12-bit digital-to-analog converter including a high stability buried zener voltage reference and a double buffer input latch on a single chip. The converter used 12 precision high speed bipolar current steering switches and a laser trimmed thin filmed resistor network to provide fast settling time and high accuracy.

Microprocessor compatibility is achieved by the on-chip double-buffered latch. The design of the input latch allows direct interface to 4-, 8-, 12-, or 16-bit buses. The 12 bits of data from the first rank of latches can then be transferred the second rank, avoiding generations of spurious analog output values. The latch responds to the strobe pulses as short as 100 ns, allowing use with the fastest available microprocessors.

The functional completeness and high performance in the AD567 results from a combination of advanced switch design, high speed bipolar manufacturing process, and the proven laser wafer-trimming (LWT) technology. The AD567 is trimmed at the wafer level and is specified to ±1/4 LSB maximum linearity error (K grade) at 25°C and ±1/2 LSB at the full operating temperature range.

The subsurface (buried) Zenor diode on the chip provides a low-noise voltage reference which has long term stability and temperature drift characteristics comparable to the best discrete reference diodes. The laser trimming process which provides the excellent linearity is also used to trim both the absolute value of the reference as well as its temperature coefficient. The AD567 is thus well suited for wide temperature range performance with ±1/2 LSB maximum linearity error and guaranteed monotonicity over the full temperature range. Typical full scale gain T.C. is 10 ppm/°C.

The AD567 is available in three performance grades. The AD567J and K are specified for use over the 0 to 70°C temperature range and are available in either 28-pin hermetically sealed, ceramic DIP or a 28-pin molded plastic DIP (N Package). The AD567S is specified for the -55°C to +125°C range and is available in the ceramic package.

AD567 特点
AD567 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
5962-8780101XA 量产 S/B OR B/B CERAMIC DIP 28 军用
AD567JD 量产 S/B OR B/B CERAMIC DIP 28 商业
AD567KD 量产 S/B OR B/B CERAMIC DIP 28 商业
AD567SD 量产 S/B OR B/B CERAMIC DIP 28 军用
AD567SD/883B 量产 S/B OR B/B CERAMIC DIP 28 军用
AD567 应用技术支持与电子电路设计开发资源下载
  1. ADI 模拟器件公司比较器产品选型指南 . PDF
  2. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .PDF