SN74ABTH162245 具有三态输出的 16 位总线收发器总线收发器
              SN74ABTH162245 描述
       The 'ABTH162245 devices are 16-bit noninverting 3-state transceivers designed   for synchronous two-way communication between data buses. The control-function   implementation minimizes external timing requirements. 
              These devices can be used as two 8-bit transceivers or one 16-bit   transceiver. They allow data transmission from the A bus to the B bus or from   the B bus to the A bus, depending on the logic level at the direction-control   (DIR) input. The output-enable (OE\) input can be used to disable the device so   that the buses are effectively isolated.   
              
The A-port outputs, which are designed to source or sink up to 12 mA, include   equivalent 25- 
 series resistors   to reduce overshoot and undershoot.   
              
Active bus-hold circuitry is provided to hold unused or floating data inputs   at a valid logic level
              
                
                   | 
                  CY74FCT245AT | 
                
                
                  | Voltage Nodes(V) | 
                  5   | 
                
                
                  | Rating | 
                  Catalog   | 
                
                
                  | Technology Family | 
                  ABT | 
                
              
              SN74ABTH162245 特性
              
              
                - Members of the Texas Instruments WidebusTM Family   
                
 - A-Port Outputs Have Equivalent 25- 
 Series   Resistors, So No External Resistors Are Required   
                 - State-of-the-Art EPIC-II BTM BiCMOS Design   Significantly Reduces Power Dissipation   
                
 - Typical VOLP (Output Ground Bounce) < 1 V at VCC =   5 V, TA = 25°C   
                
 - Distributed VCC and GND Pin Configuration Minimizes High-Speed   Switching Noise   
                
 - Flow-Through Architecture Optimizes PCB Layout   
                
 - Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown   Resistors   
                
 - Latch-Up Performance Exceeds 500 mA Per JESD 17   
                
 - ESD Protection Exceeds 2000 V Per MIL-STD-833, Method 3015; Exceeds 200 V   Using Machine Model (C = 200 pF, R = 0)   
                
 - Package Options Include Plastic Thin Shrink Small-Outline (DGG), Thin Very   Small-Outline (DGV), and Shrink Small-Outline (DL) Packages and 380-mil   Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Spacings
 
              
              SN74ABTH162245 芯片订购指南
              
                
                  | 器件 | 
                  状态 | 
                  温度 | 
                  价格(美元) | 
                  封装 | 引脚 | 
                  封装数量 | 封装载体 | 
                  丝印标记 | 
                
                
                  | SN74ABTH162245DL | 
                  ACTIVE | 
                  -40 to 85 | 
                  0.95 | 1ku | 
                  SSOP (DL) | 48 | 
                  25 | TUBE | 
                    | 
                
                
                  | SN74ABTH162245DLR | 
                  ACTIVE | 
                  -40 to 85 | 
                  0.80 | 1ku | 
                  SSOP (DL) | 48 | 
                  1000 | LARGE T&R | 
                    | 
                
              
              SN74ABTH162245 质量与无铅数据
              
                
                  | 器件 | 
                  环保计划* | 
                  铅/焊球涂层 | 
                  MSL 等级/回流焊峰 | 
                  环保信息与无铅 (Pb-free) | 
                  DPPM / MTBF / FIT 率 | 
                
                
                  | SN74ABTH162245DL | 
                  Green (RoHS & no Sb/Br)  | 
                  CU NIPDAU  | 
                  Level-1-260C-UNLIM | 
                  SN74ABTH162245DL | 
                  SN74ABTH162245DL | 
                
                
                  | SN74ABTH162245DLR | 
                  Green (RoHS & no Sb/Br)  | 
                  CU NIPDAU  | 
                  Level-1-260C-UNLIM | 
                  SN74ABTH162245DLR | 
                  SN74ABTH162245DLR | 
                
              
              SN74ABTH162245 应用技术支持与电子电路设计开发资源下载
              
                - SN74ABTH162245 数据资料   dataSheet 下载.PDF 
 
                - TI 德州仪器缓冲器、驱动器/收发器产品选型与价格 . xls 
 
                - CMOS 非缓冲反向器在振荡器电路中的使用 (PDF 951 KB)
 
                - Semiconductor Packing Methodology (PDF 3005 KB)
 
                - 逻辑产品选择指南 2006/2007 (修订版 Z)(4462KB)
 
                - 标准线性和逻辑产品 5 分钟指南 (786KB)
 
                - 了解和解释标准逻辑数据表
 
                - LOGIC Pocket Data Book  (PDF  6001 KB)
 
                - HiRel Unitrode Power Management Brochure  (PDF  206 KB)
 
                - Logic Cross-Reference (PDF  2938 KB)