The 'ABT640 bus transceivers are designed for asynchronous communication   between data buses. These devices transmit inverted data from the A bus to the B   bus or from the B bus to the A bus, depending on the level at the   direction-control (DIR) input. The output-enable (
) input can be   used to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, 
should be tied to   VCC through a pullup resistor; the minimum value of the resistor is   determined by the current-sinking capability of the driver.
The SN54ABT640 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT640 is characterized for operation from -40°C to 85°C
| CY74FCT245AT | |
| Voltage Nodes(V) | 5 | 
| Vcc range(V) | 4.5 to 5.5 | 
| Input Level | TTL | 
| Output Level | TTL | 
| Output Drive(mA) | -32/64 | 
| No. of Outputs | 8 | 
| Logic | Inv | 
| Static Current | 15.12 | 
| tpd max(ns) | 4.9 | 
| Rating | Catalog | 
| Technology Family | ABT | 
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 | 
| SN74ABT640DW | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
| SN74ABT640DWE4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
| SN74ABT640DWG4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE | 
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 | 
| SN74ABT640DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT640DW | SN74ABT640DW | 
| SN74ABT640DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT640DWE4 | SN74ABT640DWE4 | 
| SN74ABT640DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT640DWG4 | SN74ABT640DWG4 |