ICL7135 4.5 位，0.003kSPS ADC，混合 BCD 输出，真差动输入，单通道



	ICL7135
Resolution(Bits)	4.5
Sample Rate (max)	3SPS
Architecture	Dual-Slope
Power Consumption(Typ)(mW)	5
DNL(Max)(+/-LSB)	0.01
INL(Max)(+/-LSB)	0.5
No Missing Codes(Bits)	14
No. of Supplies	2
Analog Voltage AV/DD(Min)(V)	4.75
Analog Voltage AV/DD(Max)(V)	5.25
Logic Voltage DV/DD(Min)(V)	4.75
Logic Voltage DV/DD(Max)(V)	5.25
Input Configuration Range	+/-Vref
Reference Mode	Ext
Rating	Catalog
Pin/Package	28PDIP
Comments	Resolution 4.5 Digit BCD
# Input Channels	4
Operating Temperature Range(°C)	0 to 70

ICL7135 说明

The ICL7135C and TLC7135C converters are manufactured with Texas Instruments highly efficient CMOS technology. These 4 1/2-digit, dual-slope-integrating, analog-to-digital converters (ADCs) are designed to provide interfaces to both a microprocessor and a visual display. The digit-drive outputs D1 through D4 and multiplexed binary-coded-decimal outputs B1, B2, B4, and B8 provide an interface for LED or LCD decoder/drivers as well as microprocessors.

The ICL7135C and TLC7135C offer 50-ppm (one part in 20,000) resolution with a maximum linearity error of one count. The zero error is less than 10 uV and zero drift is less than 0.5 uV/°C. Source-impedance errors are minimized by low input current (less than 10 pA).

ICL7135 特性

• Zero Reading for 0-V Input
• Precision Null Detection With True Polarity at Zero
• 1-pA Typical Input Current
• True Differential Input
• Multiplexed Binary-Coded-Decimal (BCD) Output
• Low Rollover Error: ±1 Count Max
• Control Signals Allow Interfacing With UARTs or Microprocessors
• Autoranging Capability With Over-and Under-Range Signals
• TTL-Compatible Outputs
• Second Source to Teledyne TSC7135, Intersil ICL7135, Maxim ICL7135, and Siliconix Si7135
• CMOS Technology

ICL7135 芯片订购指南

器件	状态	温度 (oC)	价格（美元）	封装 | 引脚	封装数量 | 封装载体	丝印标记
ICL7135CN	ACTIVE	0 to 70	4.40 | 1ku	PDIP (N) | 28	13 | TUBE	ICL7135CN TLC7135CN
ICL7135CNG4	ACTIVE	0 to 70	4.40 | 1ku	PDIP (N) | 28	13 | TUBE	ICL7135CN TLC7135CN

ICL7135 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
ICL7135CN	Green (RoHS & no Sb/Br)	CU NIPDAU	N/A for Pkg Type		ICL7135CN
ICL7135CNG4	Green (RoHS & no Sb/Br)	CU NIPDAU	N/A for Pkg Type		ICL7135CNG4

ICL7135 应用技术支持与电子电路设计开发资源下载

1. ICL7135 数据资料 dataSheet 下载.PDF
2. TI 德州仪器仪ADC 模数转换器产品选型与价格 . xls
3. 模数规格和性能特性术语表 (Rev. A) (PDF 1993 KB)
4. 所选封装材料的热学和电学性质 (PDF 645 KB)
5. 高速数据转换 (PDF 1967 KB)
6. Shelf-Life Evaluation of Lead-Free Component Finishes (PDF 1305 KB)
7. A Spreadsheet for Calculating the Frequency Response of the ADS1250-54 (PDF 461 KB)
8. A Spreadsheet for Calculating the Frequency Response of the ADS1250-54
9. Understanding the ADS1251, ADS1253, and ADS1254 Input Circuitry (PDF 39 KB)
10. Analog-to-Digital Converter Grounding Practices Affect System Performance (PDF 56 KB)
11. Principles of Data Acquisition and Conversion (PDF 50 KB)
12. Interleaving Analog-to-Digital Converters (PDF 64 KB)
13. What Designers Should Know About Data Converter Drift (PDF 95 KB)
14. Giving Delta-Sigma Converters a Gain Boost with a Front End Analog Gain Stage (PDF 70 KB)
15. Programming Tricks for Higher Conversion Speeds Utilizing Delta Sigma Converters (PDF 105 KB)

ICL7135 工具与软件

名称	型号	公司	工具/软件类型
用于模数转换器的抗混淆计算工具	ANTIALIASINGCALC	Texas Instruments	计算实用程序
运算放大器至 ADC 电路拓扑计算器	ADC-INPUT-CALC	Texas Instruments	计算实用程序