The 'ACT16827 are noninverting 20-bit buffers composed of two 10-bit sections   with separate output-enable signals. For either 10-bit buffer section, the two   output-enable (1
 and 1
 or 2
 and 2
) inputs must   both be low for the corresponding Y outputs to be active. If either   output-enable input is high, the outputs of that 10-bit buffer section are in   the high-impedance state.
The 74ACT16827 is packaged in TI's shrink small-outline package, which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.
The 54ACT16827 is characterized for operation over the full military temperature range of -55°C to 125°C. The 74ACT16827 is characterized for operation from -40°C to 85°C
| 74ACT16827 | |
| Voltage Nodes(V) | 5 | 
| Vcc range(V) | 4.5 to 5.5 | 
| Logic | True | 
| Input Level | TTL | 
| Output Level | CMOS | 
| Output Drive(mA) | -24/24 | 
| No. of Outputs | 20 | 
| tpd max(ns) | 11 | 
| Static Current | 0.08 | 
| Rating | Catalog | 
| Technology Family | ACT | 
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 | 
| 74ACT16827DL | ACTIVE | -40 to 85 | 1.60 | 1ku | SSOP (DL) | 56 | 25 | TUBE | ACT16827 | 
| 74ACT16827DLG4 | ACTIVE | -40 to 85 | 1.60 | 1ku | SSOP (DL) | 56 | 25 | TUBE | ACT16827 | 
| 74ACT16827DLR | ACTIVE | -40 to 85 | 1.35 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R | ACT16827 | 
| 74ACT16827DLRG4 | ACTIVE | -40 to 85 | 1.35 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R | ACT16827 | 
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 | 
| 74ACT16827DL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | 74ACT16827DL | 74ACT16827DL | 
| 74ACT16827DLG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | 74ACT16827DLG4 | 74ACT16827DLG4 | 
| 74ACT16827DLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | 74ACT16827DLR | 74ACT16827DLR | 
| 74ACT16827DLRG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | 74ACT16827DLRG4 | 74ACT16827DLRG4 |