|
TPS65141 |
| Vin(Min)(V) |
2.7 |
| Vin(Max)(V) |
5.8 |
| Vout(Min)(V) |
5 |
| Vout(Max)(V) |
15 |
| LDO |
1 |
| DC/DC Converter |
1 |
| Charge Pump |
2 |
| Pin/Package |
24HTSSOP, 24VQFN |
| Vlogic1 Ilim(Min)(A) |
LDO Controller |
| Vlogic1(Min)(V) |
Fixed 3.3 |
| VGH / Vpos (Igh) |
Integrated 30V max., 20mA |
| VGL / Vneg (Igl) |
20mA |
| Operating Temperature Range(°C) |
-40 to 85 |
| Switching Frequency(Typ)(kHz) |
1600 |
| AVDD Ilim(Min)(A) |
1.6 |
| Analog Voltage AV/DD(Max)(V) |
15 |
| Over-Voltage Protection(Max)(V) |
5% of AVDD |
| Regulated Outputs(#) |
4 |
| Rating |
Catalog |
| Function |
Display Bias |
| Topology |
Boost, Inverting Buck/Boost |
| Iout(Max)(A) |
0.02 |
| Duty Cycle(Max)(%) |
100 |
| Iq(Typ)(mA) |
4.1 |
| Target Application |
Large & Medium Form Factor |
The TPS6514x series offers a compact and small power supply solution to provide all three voltages required by thin film transistor (TFT) LCD displays. The auxiliary linear regulator controller can be used to generate a 3.3-V logic power rail for systems powered by a 5-V supply rail only.
The main output VO1 is a 1.6-MHz fixed frequency PWM boost converter providing the source drive voltage for the LCD display. The device is available in two versions with different internal switch current limits to allow the use of a smaller external inductor when lower output power is required. The TPS65140/41 has a typical switch current limit of 2.3 A and the TPS65145 has a typical switch current limit of 1.37 A. A fully integrated adjustable charge pump doubler/tripler provides the positive LCD gate drive voltage