ST7DALIF2 8位微控制器,ADC,SPI接口

The ST7DALI is a member of the ST7 microcontroller family. All ST7 devices are based on a common industry-standard 8-bit core, featuring an enhanced instruction set.The ST7DALI features FLASH memory with byteby-byte In-Circuit Programming (ICP) and In-Application Programming (IAP) capability.Under software control, the ST7DALI device can be placed in WAIT, SLOW, or HALT mode, reducing power consumption when the application is in idle or standby state.

The enhanced instruction set and addressing modes of the ST7 offer both power and flexibility to software developers, enabling the design of highly efficient and compact application code. In addition to standard 8-bit data management, all ST7 microcontrollers feature true bit manipulation, 8x8 unsigned multiplication and indirect addressing modes.For easy reference, all parametric data are located in section 13 on page 100.The devices feature an on-chip Debug Module (DM) to support in-circuit debugging (ICD). For a description of the DM registers,refer to the ST7 ICC Protocol Reference Manual.

ST7DALIF2 订购型号:

ST7DALIF2 产品特点

• Memories
  – 8 Kbytes single voltage Flash Program memory with read-out protection, In-Circuit Programming and In-Application programming (ICP and IAP). 10K write/erase cycles guaranteed,data retention: 20 years at 55°C.
  – 384 bytes RAM
  – 256 bytes data EEPROM with read-out protection.300K write/erase cycles guaranteed, data retention: 20 years at 55°C.
• Clock, Reset and Supply Management
  – Enhanced reset system
  – Enhanced low voltage supervisor (LVD) for main supply and an auxiliary voltage detector (AVD) with interrupt capability for implementing safe power-down procedures
  – Clock sources: Internal 1% RC oscillator,crystal/ceramic resonator or external clock
  – Internal 32-MHz input clock for Auto-reload timer
  – Optional x4 or x8 PLL for 4 or 8 MHz internal clock
  – Five Power Saving Modes: Halt, Active-Halt,Wait and Slow, Auto Wake Up From Halt
• I/O Ports
  – Up to 15 multifunctional bidirectional I/O lines
  – 7 high sink outputs
• 4 Timers
  – Configurable Watchdog Timer
  – Two 8-bit Lite Timers with prescaler, watchdog, 1 realtime base and 1 input capture
  – One 12-bit Auto-reload Timer with 4 PWM outputs, input capture and output compare functions
• 2 Communication Interfaces
  – SPI synchronous serial interface
  – DALI communication interface
• Interrupt Management
  – 10 interrupt vectors plus TRAP and RESET
  – 15 external interrupt lines (on 4 vectors)
• A/D Converter
  – 7 input channels
  – Fixed gain Op-amp
  – 13-bit resolution for 0 to 430 mV (@ 5V VDD)
  – 10-bit resolution for 430 mV to 5V (@ 5V VDD
• Instruction Set
  – 8-bit data manipulation
  – 63 basic instructions with illegal opcode detection
  – 17 main addressing modes
  – 8 x 8 unsigned multiply instructions
• Development Tools
  – Full hardware/software development package
  – DM (Debug module)

ST7DALIF2 技术支持与电子电路设计开发资源下载

1. ST7DALIF2 数据手册 DataSheet 下载.pdf
2. ST7 微控制器选型指南.pdf
3. 相关产品选型( Excel 文档格式)
4. 《新闻报道 》低成本开发工具能够调试ST7、μPSD和STR7微控制器的应用程序
5. 电机控制：参考指南 (产品手册, PDF)
6. ST7Lite系列: 面向苛刻应用而优化的小型用户友好型微控制器 (产品手册, PDF)
7. ST7LNB DiSEqC? 微控制器家族 (产品手册, PDF)
8. ST7263B与ST7260 USB低速微控制器系列 (产品手册, PDF)
9. ST7232x: 可简化开发、提供系统可靠性的经济型8位微控制器家族 (产品手册, PDF)
10. 意法半导体应用支持 . PDF
11. 先进半导体解决方案的门电子
12. 电机控制参考指南
13. 周围半导体机顶盒应用. PDF
14. 汽车的8位闪存微控制器. PDF
15. 8 ,16和32位微控制器产品和工具选择指南. PDF
16. 电机控制选型指南. PDF