首页 > SAMSUNG 三星 > Flash SSD 存储器 > SSD for Enterprise
SSD for Enterprise 存储器
PART NUMBER Interface Form Factor Density Voltage(V) Production Status Application
MCBQE25G5MPQ SATA 1.5Gbps 2.5inch 25GB 5 EOL Server,storage
MCBQE25G5MPQ-0VA - - 25G Byte - - -
MCBQE32G5MPQ SATA 1.5Gbps 2.5inch 32GB 5 EOL Server,storage
MCBQE32G5MPQ-0VA - - 32G Byte - - -
MCCOE50G5MPQ SATA 1.5Gbps 2.5inch 50GB 5 EOL Server,storage
MCCOE50G5MPQ-0VA - - 50G Byte - - -
MCCOE64G5MPQ SATA 1.5Gbps 2.5inch 64GB 5 EOL Server,storage
MCCOE64G5MPQ-0VA - - 64G Byte - - -
MCB4E50G5MXP SATA 3.0Gbps 2.5inch 50GB 5 Mass Production Server,storage
MCB4E60G5MXP SATA 3.0Gbps 2.5inch 60GB 5 Mass Production Server,storage
MCCOE1HG5MXP SATA 3.0Gbps 2.5inch 100GB 5 Mass Production Server,storage
MCCOE1HG5MXP-0VB - - 100G Byte - - -
MCCOEA2G5MXP SATA 3.0Gbps 2.5inch 12GB 5 Mass Production Server,storage
Less energy, more performance

Samsung Enterprise SSD, using the controller designed based on low-level power, dramatically reduces the power consumption of existing storage and shows high performance in terms of the industry Enterprise SATA SSD. Samsung Enterprise SSD has reduced power consumption to about 25% of existing 15Krpm Enterprise HDD, while obtaining performance gains more than 50 times greater than Random Read and more than 15 times greater than Random Write. Because Samsung Enterprise SSD enables one SSD to process the same amount as several HDDs and several SSDs consume the same power as only one HDD, your TCO (Total Cost of Ownership) will be maximized.

More Reliability

In order to process data in a more stable manner, Enterprise SSD has improved MTBF more than two times greater than Enterprise HDD. In addition, Samsung, as a NAND manufacture, understands the basic characteristics of NAND better than anyone else, and improved MTBF of the existing NAND because it designed SSD Controller based on its specialized knowledge of NAND.

Save your Data from Sudden power off

As corporate data means dollars in modern society, the users’ data must be preserved under all circumstances. Designed to use auxiliary power supply, Samsung Enterprise SSD fully protects the user’s data 100 percent in the event of an unexpected situation such as sudden power off.

Improved technology

Samsung Enterprise SSD provides efficient Queue management as it supports up to 32 queues of Native Command Queue (NCQ). Using Overprovisioning, Samsung Enterprise SSD has also overcome the weakness of NAND Flash in writing small data. Using Overprovisioning guarantees a long lifetime by extending endurance and can maximize performance in a random environment where there are a lot of small data.

Samsung Enterprise SSD already on Market

As far as server/storage is concerned, it is believed that data is equal to dollars (‘Data=$’), so the qualification process for drives is very strict. The fact that Samsung Enterprise SSD has already been adopted by the highest number of major OEMs verifies the stability and performance of Samsung Enterprise SSD.

SS805 series Technical specification
2.5-inch
Form factor (100x69.85x15.00mmt)
Density 50GB and 100GB
Weight 50GB : Max. 121g
100GB : Max. 131g
Power Consumption Active Read 1.50 W
Active Write 2.07 W
Idle 0.10 W
Performance Sequential Read Up to 230MB/s
Sequential Write Up to 180MB/s
Interface
  • Serial ATA interface of 3.0Gbps (SATA 3.0Gbps)
  • Fully complies with ATA/ATAPI-7 standard
  • Asynchronous Signal Recovery (Hot-plug)
  • Active LED indication (Pin11)
  • Native Command Queuing (NCQ, 32Depth)
Operating temperature 0’C ~ 60’C
Operating voltage 5V
Shock 1500G, duration 0.5ms, Half Sine Wave
Vibration 20G peak, 10~2000Hz(15min/Axis)x3Axis
System reliability Min. 2million hours MTBF
Datasheet
Related Document
Case study
White paper