ATMEL智能卡读卡器产品AT83C26

AT83C26 概述

The AT83C26 is a smart card reader interface IC for smart card reader/writer applications such as EFT/POS terminals and set top boxes. It enables the management of any type of smart card from any kind of host. Up to 4 AT83C26 can be connected in parallel thanks to the programmable TWI address.
Its high efficiency DC/DC converters and low quiescent current in stand-by mode
make it particularly suited to low power and portable applications. The reduced bill of
material allows to lower significantly the system size and cost. A sophisticated protection system guarantees timely and controlled shutdown upon error conditions.

AT83C26 特性

• 5 Smart Card Interfaces
  – Compliance with ISO 7816, EMV2000, GIE-CB and GSM Standards
  – Direct Connection to the Smart Cards
  Logic Level Shifters
  Short Circuit Current Limitation
  4kV+ ESD Protection (MIL/STD 883 Class 3)
  – 1 or 2 Master Smart Card interfaces
  Synchronous Card support (with C4 and C8 Contacts)
  Card Detection and Automatic de-activation sequence on card extraction
  – 1 to 4 SAM/SIM cards (15 to 30mA each)
  – Programmable Voltage for each smart card
  Class A: 5V ±0.4V at 60 mA (±0.25V at 65 mA with VCC= 5V±10%)
  Class B: 3V ±0.2V at 60 mA
  Class C: 1.8V ±0.14V at 40mA
  – Low Ripple Noise: < 200 mV
  – Programmable Activation Sequence
  – Automatic de-activation on card power-fail or over-current and system power-fail
  – Card Clock Stop High or Low for Card Power-down Modes
  o Versatile Host Interface
  – Two Wire Interface (TWI) Link at 400kbit/s
  Programmable Address allow up to 4 AT83C26 on the bus
  – Programmable Interrupt Output
  o Reset Output Includes
  – Power-On Reset (POR)
  – Power-Fail Detector (PFD)
  o Extended Voltage Operation: 3 to 5.5V
  o Low Power Consumption
  – 5 mA Maximum Operating Current (without Smart Card)
  – 150 mA Maximum In-rush Current (each DC/DC)
  – 30 μA Typical Power-down Current (without Smart Card)
  o 4 to 48 MHz Clock Input
  o System clock derived from the external clock input
  o Industrial Temperature Range: -40 to +85°C
  o Packages: QFN48, VQFP48

AT83C26 订购型号

Part Number	Supply Voltage	Package	Temperature Range	Packing
AT83C26-PLTUL	3V to 5.5V	MLF48	Industrial green	Tray
AT83C26-PLRUL	3V to 5.5V	MLF48	Industrial green	Tape Reel
AT83C26-RKTUL	3V to 5.5V	VQFP48	Industrial green	Tray
AT83C26-RKRUL	3V to 5.5V	VQFP48	Industrial green	Tape Reel
AT83C26-PLTEL	3V to 5.5V	MLF48	25°C	Tray
AT83C26-RKTEL	3V to 5.5V	VQFP48	25°C	Tray